Affordable PTO Generators
Generator By GenStar PTO Power
Click Pictures to Enlarge
This is the 22 kW Unit
Volt Meter
Hertz or Cycle Meter
Notice the Warning Message
All PTO Generators Have To Be Secured To
A Solid Foundation. Such As
Three Point Hitch Attached to the Tractor
Approved Trailer With Wheels Wide Enough to Support the Generator Torque
A Concrete Pad With Bolts Available to Secure the Frame of the Generator
Timbers have also Been Used to secure the Generator.
When The Electrical Load is Applied to the Generator
A Magnet Field Will be Produced Which Can Cause the Generator to Flip Over.
This is The Main Power Outlet Located Under the Weather Proof Cover
We Furnish the Main Power Plug That is to Plug into This Outlet
With Our Package All You Need to Furnish is the Wire
From to Plug To Your Disconnect Box
I am holding Up the Main Power Plug Furnished with the Gen Set
The Connection Diagram is Taped on the Plug Cover As shown Above
The Internal Barrels Can easily be Removed to Install The Wires
The Wires can be Soldered or Crimped into the Lugs
The Picture on the Right Indicates the Proper Wire Connections
This is the Breakers Located on the 22 kW PTO Gen Set
90 amp 2 Pole for Main Power Plug
50 amp 2 Pole for Panel mounted Receptacle
20 amp Breaker for the 120 volt Outlets
This is the 50 amp Power Receptacle.
This is the 120 volt Outlets
The Universal Shaft Furnished with the
Packaged 22 kW Unit
You Can Contact Me At:
Phone Home Office: 337-367-7036